Skip to content

Best selling products

Shop our hottest selling items. Our most commonly bought items are Bray Butterfly Valves, Type K Survey Wire and Molydenum Nuts, Studs and All Thread. Shop our HUGE Inventory of heat treat spare parts in stock and ready for shipment! Our products fit every brand of furnace like Ipsen, Solar Manufacturing, GM Enterprises, ProTech Thermal and Seco Warwick!

Filters

  • FT19 Holding Pump Vacuum Oil - The Heat Treat Shop
    Holding Pump Fluid Inland 19 / FT-19 - The Heat Treat Shop

    FT19 Holding Pump Vacuum Oil

    Protechthermal
    $75.00 - $3,750.00
    $75.00 - $3,750.00
    $75.00 - $3,750.00
    $75.00
    in stock

    FT19 is recommended for use in non-corrosive applications. Through molecular distillation, light end fractions are removed, resulting in lower vapo...

    View full details
    $75.00 - $3,750.00
    $75.00 - $3,750.00
    $75.00 - $3,750.00
    $75.00
  • Ceramic Tubes 3-1/8”ID x 3-1/2”OD x 8” Long 99.8% Alumina - The Heat Treat Shop

    Ceramic Tubes 3-1/8”ID x 3-1/2”OD x 8” Long 99.8% Alumina

    Protechthermal
    $299.00 - $299.00
    $299.00
    $299.00 - $299.00
    $299.00
    in stock

    Ceramic tube insulators. 99.8% Alumina Material Open Both End Tube Intended use for high temperature applications like heat treat furnaces. Vacuum...

    View full details
    $299.00 - $299.00
    $299.00
    $299.00 - $299.00
    $299.00
  • Coated Graphite Board (Foil Face) - The Heat Treat Shop

    Coated Graphite Board (Foil Face)

    Protechthermal
    $870.00 - $870.00
    $870.00
    $870.00 - $870.00
    $870.00
    Only 5 left!

    Dimensions: 1”THK x 24”W x 52”LG

    $870.00 - $870.00
    $870.00
    $870.00 - $870.00
    $870.00
  • Graphite Soft Felt 1/4”THK Sigratherm® - The Heat Treat Shop
    Graphite Felt 1/4”THK Sigratherm® Insulation - The Heat Treat Shop

    Graphite Felt 1/4”THK Sigratherm® Insulation

    Protechthermal
    $3,394.00 - $3,394.00
    $3,394.00
    $3,394.00 - $3,394.00
    $3,394.00
    Only 2 left!

    Sold by the Roll. 175SQFT Per Roll/ 18.5 Meters Rolls are roughly 40" Wide Typical properties of the material Very low thermal conduct...

    View full details
    $3,394.00 - $3,394.00
    $3,394.00
    $3,394.00 - $3,394.00
    $3,394.00
  • Graphite Stud 1"-8UNC x 4-1/2" Long - The Heat Treat Shop

    Carbon Graphite Stud 1"-8UNC x 4-1/2" Long

    Protechthermal
    $15.00 - $15.00
    $15.00
    $15.00 - $15.00
    $15.00
    in stock

    SGL Sigrafine® HLM Grade Carbon Graphite threaded stud. Spare parts commonly found in Ipsen, Abar, GM Enterprises, Solar MFG., Seco Warwick and Pro...

    View full details
    $15.00 - $15.00
    $15.00
    $15.00 - $15.00
    $15.00
  • Moly Insulation Pin 1/4"-20UNC - The Heat Treat Shop

    Molybdenum Alloy Insulation Pin 1/4"-20UNC

    Protechthermal
    $12.00 - $15.00
    $12.00 - $15.00
    $12.00 - $15.00
    $12.00
    in stock

    Load bearing max tensile strength up to 2000 °C Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Low vapor pressure Hi...

    View full details
    $12.00 - $15.00
    $12.00 - $15.00
    $12.00 - $15.00
    $12.00
  • Moly Studs 3/8"-16UNC - The Heat Treat Shop

    Molybdenum Alloy Studs 3/8"-16UNC

    Protechthermal
    $11.00 - $12.00
    $11.00 - $12.00
    $11.00 - $12.00
    $11.00
    in stock

    Load bearing max tensile strength up to 2000 °C Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Low vapor pressure High...

    View full details
    $11.00 - $12.00
    $11.00 - $12.00
    $11.00 - $12.00
    $11.00
  • Molybdenum Alloy Studs 3/8" - 16UNC w/ Two (2) Hole - The Heat Treat Shop

    Molybdenum Alloy Studs 3/8"-16UNC w/ Two (2) Hole

    Protechthermal
    $11.00 - $15.00
    $11.00 - $15.00
    $11.00 - $15.00
    $11.00
    in stock

    Load bearing max tensile strength up to 2000 °C Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Low vapor pressure High...

    View full details
    $11.00 - $15.00
    $11.00 - $15.00
    $11.00 - $15.00
    $11.00
  • Molybdenum Parts w/ Phenolic - The Heat Treat Shop
    Sold out

    Molybdenum Parts w/ Phenolic

    Protechthermal
    $1,690.00 - $1,690.00
    $1,690.00
    $1,690.00 - $1,690.00
    $1,690.00
    Out of stock

    Moly T Block Per Drawing: $375 Moly Strips .060 x 1” x 3.75” Long: $35EA x 6QTY = $210 Phenolic Tubes: $9.75EA x 24QTY: $234 Phenolic Washers: $8EA...

    View full details
    $1,690.00 - $1,690.00
    $1,690.00
    $1,690.00 - $1,690.00
    $1,690.00
    Sold out
  • Ceramic Support Standoffs 99.8% Alumina - The Heat Treat Shop

    Ceramic Support Standoffs 99.8% Alumina

    Protechthermal
    $28.00 - $31.00
    $28.00 - $31.00
    $28.00 - $31.00
    $28.00
    in stock

    Vacuum Furnace Ceramic element support stand offs. 99.8% Alumina Intended use for high temperature applications like heat treat furnaces to suppor...

    View full details
    $28.00 - $31.00
    $28.00 - $31.00
    $28.00 - $31.00
    $28.00
  • Vacuum Furnace KF Fittings
    KF Clamp (Optional Centering Ring) - The Heat Treat Shop

    KF Clamp (Optional Centering Ring)

    Protechthermal
    $12.98 - $44.98
    $12.98 - $44.98
    $12.98 - $44.98
    $12.98
    in stock

    $12.98 - $44.98
    $12.98 - $44.98
    $12.98 - $44.98
    $12.98
  • Ceracham Blanket 2600ºF - The Heat Treat Shop

    Nutec MaxWool Ceramic Fiber Insulation Blanket 2600ºF (Kaowool)

    Protechthermal
    $299.00 - $299.00
    $299.00
    $299.00 - $299.00
    $299.00
    in stock

    Sold by the Roll. Roll: 1"Thk x 24" Wide x 300" Length Box/ Roll Dimensions: 1" X 24" X 25' 8# 2600° HTZ MAXWOOL BLANKET (50SF/BOX) Key Features...

    View full details
    $299.00 - $299.00
    $299.00
    $299.00 - $299.00
    $299.00
  • Graphite Washer 1/4"Thk x 9/32"ID x 2"OD - The Heat Treat Shop

    Carbon Graphite Washer 1/4"Thk x 9/32"ID x 2"OD

    Protechthermal
    $16.00 - $16.00
    $16.00
    $16.00 - $16.00
    $16.00
    in stock

    SGL Sigrafine® HLM Grade Carbon Graphite washer. Spare parts commonly found in Ipsen, Abar, GM Enterprises, Solar MFG., Seco Warwick and ProTech Th...

    View full details
    $16.00 - $16.00
    $16.00
    $16.00 - $16.00
    $16.00
  • Graphite Threaded Nut 1"-8UNC x 5/8"Thk x 2" OD - The Heat Treat Shop

    Carbon Graphite Threaded Nut 1"-8UNC x 1"Thk x 2-1/2" OD

    Protechthermal
    $20.00 - $20.00
    $20.00
    $20.00 - $20.00
    $20.00
    in stock

    SGL Sigrafine® HLM Grade Carbon Graphite threaded nut. Spare parts commonly found in Ipsen, Abar, GM Enterprises, Solar MFG., Seco Warwick and ProT...

    View full details
    $20.00 - $20.00
    $20.00
    $20.00 - $20.00
    $20.00
  • Moly Heating Element Coil .030"Thk - The Heat Treat Shop

    Molybdenum Alloy Heating Element Coil .030"Thk

    Protechthermal
    $398.98 - $575.95
    $398.98 - $575.95
    $398.98 - $575.95
    $398.98
    Only 4 left!

    Dimension: .015"Thk x 5" Wide x 60' Long (Shiny Finish) Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Highly thermal ...

    View full details
    $398.98 - $575.95
    $398.98 - $575.95
    $398.98 - $575.95
    $398.98
  • TZM Molybdenum Rod 1.125"Diameter x 72 Long - The Heat Treat Shop

    Molybdenum Rod 1.25"Diameter x 55" Long

    Protechthermal
    $1,985.00 - $1,985.00
    $1,985.00
    $1,985.00 - $1,985.00
    $1,985.00
    in stock

    Moly Rod 1-1/8"Diameter x 72" Long  4 Week Leadtime after Order Placement Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivi...

    View full details
    $1,985.00 - $1,985.00
    $1,985.00
    $1,985.00 - $1,985.00
    $1,985.00
  • Ceramic Washers 1/4"THK X 17/64" ID X 1/2"OD 99.8% Alumina - The Heat Treat Shop

    Ceramic Washers 1/4"THK X 17/64" ID X 1/2"OD 99.8% Alumina

    Protechthermal
    $7.25 - $7.25
    $7.25
    $7.25 - $7.25
    $7.25
    in stock

    Vacuum Furnace Ceramic washer. All washers are 99.8% Alumina and intended use for high temperature applications like heat treat furnaces. Vacuum Fu...

    View full details
    $7.25 - $7.25
    $7.25
    $7.25 - $7.25
    $7.25
  • Shell® Tellus S2 MX46 Hydraulic Fluid - The Heat Treat Shop

    Shell® Tellus S2 MX46 Hydraulic Fluid

    Protechthermal
    $1,285.00 - $1,285.00
    $1,285.00
    $1,285.00 - $1,285.00
    $1,285.00
    in stock

    Shell Tellus S2 MX Industrial Hydraulic Fluid, Group II Base Oil Technology, Industrial ApplicationsShell Tellus S2 MX fluids are high performance ...

    View full details
    $1,285.00 - $1,285.00
    $1,285.00
    $1,285.00 - $1,285.00
    $1,285.00
  • TZM Molybdenum Rod 1.125"Diameter x 72 Long - The Heat Treat Shop

    Molybdenum Rod 1.125"Diameter x 55" Long

    Protechthermal
    $1,789.00 - $1,789.00
    $1,789.00
    $1,789.00 - $1,789.00
    $1,789.00
    in stock

    Moly Rod 1-1/8"Diameter x 72" Long  4 Week Leadtime after Order Placement Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivi...

    View full details
    $1,789.00 - $1,789.00
    $1,789.00
    $1,789.00 - $1,789.00
    $1,789.00
  • TZM Molybdenum Bar

    TZM Molybdenum Flat Bar 1/4"Thk x 2-1/2"W x 72" Long

    Protechthermal
    $1,690.00 - $1,690.00
    $1,690.00
    $1,690.00 - $1,690.00
    $1,690.00
    Only 4 left!

    Leadtime: 4 Weeks ARO Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Highly thermal expansion resistant Corrosion resi...

    View full details
    $1,690.00 - $1,690.00
    $1,690.00
    $1,690.00 - $1,690.00
    $1,690.00
  • TZM Molybdenum Flat Bar 1/4"Thk x 1 - 1/2"W x 84" Long - The Heat Treat Shop

    TZM Molybdenum Flat Bar 1/4"Thk x 1-1/2"W x 72" Long

    Protechthermal
    $1,580.00 - $1,580.00
    $1,580.00
    $1,580.00 - $1,580.00
    $1,580.00
    Only 4 left!

    Leadtime: 4 Weeks ARO Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Highly thermal expansion resistant Corrosion resi...

    View full details
    $1,580.00 - $1,580.00
    $1,580.00
    $1,580.00 - $1,580.00
    $1,580.00
  • Ceramic Tubes 2-3/4”ID x 3”OD x 8” Long 99.8% Alumina - The Heat Treat Shop
    Sold out

    Ceramic Tubes 2-3/4”ID x 3”OD x 8” Long 99.8% Alumina

    Protechthermal
    $498.00 - $498.00
    $498.00
    $498.00 - $498.00
    $498.00
    Out of stock

    Ceramic tube insulators. 99.8% Alumina Material Open Both End Tube Intended use for high temperature applications like heat treat furnaces. Vacuum...

    View full details
    $498.00 - $498.00
    $498.00
    $498.00 - $498.00
    $498.00
    Sold out
  • Mega Moly Coils (In Stock) - The Heat Treat Shop

    Mega Molybdenum Coils (In Stock)

    Protechthermal
    $10,986.00 - $11,990.00
    $10,986.00 - $11,990.00
    $10,986.00 - $11,990.00
    $10,986.00
    Only 1 left!

    Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Highly thermal expansion resistant Corrosion resistant Element Coil Fo...

    View full details
    $10,986.00 - $11,990.00
    $10,986.00 - $11,990.00
    $10,986.00 - $11,990.00
    $10,986.00
  • Moly Tie Wire .060"Dia x 2" Lg - The Heat Treat Shop

    Molybdenum Alloy Tie Wire .060"Dia x 2" Lg

    Protechthermal
    $11.00 - $11.00
    $11.00
    $11.00 - $11.00
    $11.00
    in stock

    Melting Temperature, 2620 °C Element: Mo Excellent electrical conductivity Highly thermal expansion resistant Corrosion resistant Element Coil Fo...

    View full details
    $11.00 - $11.00
    $11.00
    $11.00 - $11.00
    $11.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare