Products

Dungs® Electric EMP Motor Part Number: 269235 EMP-423-1 60 IN LB Output 90 Deg 100 OHM 12S Fixed Timing 120 VAC 60 HZ 0.65A AUX SW 6A @120 VA...

Dungs® Electric EMP Motor Part Number: 267229 EMP-423-5 60 in-lb Output 4-20 mA 100 oHms Fixed Timing 12s 120Vac 60Hz NEMA Type 4  

Dungs® EMP Motor Part Number: 269222 60 in-lb Output 90 Deg 100 Ohm 12s Adjustable 120Vac 60Hz NEMA Type 1 Aux Sw 6A  120Vac 0.65A

Dungs® EMP Motor Part Number: 269223  60 in-lb Output 90 Deg 4-20 mA Adjustable Timing 120Vac 60Hz NEMA Type 4 Aux Sw 6A @ 120Vac 0.65A

Dungs® Electric EMP Motor Part Number: 269223 220 in-lb Output 90 Deg 100 Ohm 40s Fixed Timing 120Vac 60Hz NEMA Type 4 Aux Sw 6A @ 120Vac 0....

Dungs® Electric EMP Motor Part Number: 269224 220 in-lb Output 90 Deg 4-20 mA 40s Fixed Timing 120Vac 60Hz NEMA Type 4 Aux Sw 6A @ 120Vac 0....

Dungs® Electric EMP Motor Part Number: 269224 220 in-lb Output 90 Deg 100 Ohm 40s Adjustable Timing 120Vac 60Hz NEMA Type 4 Aux Sw 6A @ 120V...

Dungs® Electric EMP Motor Part Number: 269226 220 in-lb Output 90 Deg 4-20 mA 40s Adjustable Timing 120Vac 60Hz NEMA Type 4 Aux Sw 6A @ 120V...

SB Series Plastic Wiring Base

Uses the same wiring subbase as the Honeywell Eclipse VeriFlame burner control system -Gas, oil or combination gas/oil burners -Flame Rod -Test mod...

Uses the same wiring subbase as the Honeywell Eclipse VeriFlame burner control system -Gas, oil or combination gas/oil burners -UV Scanner -Test mo...

Uses the same wiring subbase as the Honeywell Eclipse VeriFlame burner control system -Gas, oil or combination gas/oil burners -Flame Rod -Test mod...

-Duty Cycle of 1 Year -1/2" NPT -Non Self Check

Self-Check MB-Series Ultra-Violet Scanner with 1" NPT Mount (120V)

Can Be Fitted With Any 7800 Series Amplifier To Provide Relay Action From Two SPDT Relays When Flame Is Present Or Not Present Suitable Primary Co...

Custom Heating Elements Leadtime: Roughly 1-2 Weeks Carbon Graphite is a very common and highly sought after material for Vacuum Furnace Hot Zone c...

FT19 is recommended for use in non-corrosive applications. Through molecular distillation, light end fractions are removed, resulting in lower vapo...

1-1/4" Wide x 8-3/4"Lg Clip Part Number: T-38

Sold By the Gallon.

Graphite Flat Bar  Dimensions: 1-1/4" Thk x 3" Wide x 72" Long Grade: NAC-673 Leadtime: 5-7 Days ARO    

Graphite Block Dimensions: 2"THK x 6" WD x 28"LG Tolerance: Saw Cut +1/8 -0.0 Material: Grade 2191

Sold by the Roll. 175SQFT Per Roll/ 18.5 Meters Rolls are roughly 40" Wide Typical properties of the material Very low thermal conduct...